Product

TPU film with double PET special for PPF non-yellow Car Paint Protection Film

Short Description:

Characteristics: Aliphatic series TPU film,high transparency,non-yellow,no fisheyes,with double PET or single PET, Scratch and wear resistance, Impact resistance and puncture resistance, High and low temperature resistance, Anti-ultraviolet,


Product Detail

Product Tags

About TPU film

Material basis
Composition: The main composition of the bare film of TPU is thermoplastic polyurethane elastomer, which is formed by reaction polymerization of diisocyanate molecules such as diphenylmethane diisocyanate or toluene diisocyanate and macromolecular polyols and low molecular polyols.
Properties: Between rubber and plastic, with high tension, high tension, strong and other
Application advantage
Protect the car paint: the car paint is isolated from the external environment, to avoid air oxidation, acid rain corrosion, etc., in the second-hand car trading, it can effectively protect the original paint of the vehicle and improve the value of the vehicle.
Convenient construction: With good flexibility and stretchability, it can fit the complex curved surface of the car well, whether it is the plane of the body or the part with a large arc, it can achieve tight fitting, relatively easy construction, strong operability, and reduce the problems such as bubbles and folds in the construction process.
Environmental health: The use of environmentally friendly materials, non-toxic and tasteless, environmentally friendly, in the production and use of the process will not cause harm to the human body and the environment.

Application

Applications: Automotive interiors and exteriors, protective film for electronic device housings, medical catheter dressings, clothing, footwear, packaging

Parameters

The above values are shown as typical values and should not be used as specifications.

Item

Unit

Test standard

Spec.

Analysis Result

Thickness

um

GB/T 6672

130±5um

130

Width deviation

mm

GB/ 6673

1555-1560mm

1558

Tensile Strength

Mpa

ASTM D882

≥45

63.9

Elongation at Break

%

ASTM D882

≥400

554.7

Hardness

Shore A

ASTM D2240

90±3

93

TPU and PET Peeling force

gf/2.5CM

GB/T 8808 (180。)

<800gf/2.5cm

280

Melt point

Kofler

100±5

102

Light transmittance

%

ASTM D1003

≥90

92.8

Fog value

%

ASTM D1003

≤2

1.2

Photoaging

Level

ASTM G154

△E≤2.0

No-yellow

Package

1.56mx0.15mmx900m/roll,1.56x0.13mmx900/roll, processed plastic pallet

1 (2)
1 (6)

Handling and Storage

1. Avoid breathing thermal processing fumes and vapors
2. Mechanical handling equipment can cause formation of dust. Avoid breathing dust.
3. Use proper grounding techniques when handling this product to avoid electrostatic charges
4. Pellets on the floor may be slippery and cause falls
Storage recommendations: To maintain product quality, store product in a cool, dry area. Keep in a tightly sealed container.

Certifications

asd

  • Previous:
  • Next:

  • Write your message here and send it to us